PhatNoise PhatBox User Manual page 53

The radio displays NO CD.
General Cases:
Problem
No Sound.
The head unit does not
recognize the PhatBox.
No Sound. The head unit
cannot access the PhatBox.
Green light on PhatBox blinks
and does not stop blinking.
Audio skipping occurs during
playback.
Page 53
PhatNoise Car Audio System User Manual
3102-MAN Copyright 2002 PhatNoise Inc.
the recommendations.
No playlists were found on the DMS cartridge.
Please place playlists on the DMS cartridge using the
PhatNoise Music Manager.
Or,
File(s) on your cartridge may be corrupt. Run the
PhatNoise DMS Doctor on your computer and follow
the recommendations.
Cause/Solution
- Adjust the volume of the head unit.
- Make sure the PhatBox cable is correctly
connected to the head unit.
- Make sure the head unit has the CD changer as
the active source.
- Make sure the navigation or telephone mute is not
activated.
- Make sure the PhatBox cable is correctly
connected to the head unit.
-
Note that during firmware reprogramming (green
light flashing), your head unit will NOT recognize
the PhatBox – for this reason, it is often better to
have the head unit off during programming.
File(s) on your cartridge may be corrupt. Run the
PhatNoise DMS Doctor on your computer and follow
the recommendations.
If you have just downloaded new firmware, this is
normal. Wait about 7 minutes until the green light
stops blinking, then both lights should go off.
Many things can cause a 'skip', or any break in
audio playback.
If you are hearing breaks in playback, here are
some things to check:
1. When you hear a skip, restart the track (or
seek backwards a bit) to hear if the skip is
actually in the music file.
2. Note that on some SSA radios, when the
playback mode changes a brief mute in sound
may occur. This is normal and a property of
the radio.
3. Check to see if you are you using the latest
firmware and desktop software. This is very
important, as software is updated frequently.
4. Sometimes a heavily fragmented cartridge