Completing The Iscsi Worksheet; Ipv4 Settings - Dell PowerVault MD3600i Getting Started

Storage arrays
Hide thumbs Also See for PowerVault MD3600i:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Completing the iSCSI Worksheet

IPv4 Settings

A
192.168.131.101 (In 1 default)
192.168.130.101 (In 0 default)
B
192.168.130.102 (In 0 default)
192.168.131.102 (In 1 default)
If you need additional space for more than one host server, use an additional sheet.
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is an optional iSCSI authentication
method where the storage array (target) authenticates iSCSI initiators on the host server. For more
information, see "Understanding CHAP Authentication" in the Deployment Guide.
A
Static IP address (host server)
iSCSI port 0
iSCSI port 1
Management port
B
Static IP address (storage array)
iSCSI controller 0, In 0
iSCSI controller 0, In 1
Management port cntrl 0
iSCSI controller 1, In 0
iSCSI controller 1, In 1
Management port cntrl 1
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
host server
192.168.128.101 (management network port)
PowerVault MD3600i
series storage array
192.168.128.102 (management network port)
Subnet mask
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
Subnet mask
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
Getting Started With Your System
Mutual
CHAP Secret
Target
CHAP Secret
Default gateway
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
Default gateway
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3620i

Table of Contents