Removing The Faceplate; Clock Display - Kenwood KDC-7090R Instruction Manual

General features

Removing the Faceplate

The faceplate can be detached from the unit, helping to deter
theft.
Removing the faceplate:
1
Choose the way from among the following and open the
faceplate.
Turn the ignition off, hold down the SRC button for one second
or more when the control panel has been hidden.
2
Holding the centre part of the faceplate, pull it out during the
period which you have set in the "Time setting for removing
the faceplate" (page 33) in the menu.
The faceplate bracket will automatically close.
2CAUTION
• When removing the faceplate, pull it out only when it is fully
open. The detachment of the faceplate whilst it is moving might
result in damage to the unit.
• Do not apply excessive force to the faceplate bracket without
attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.
• Do not touch the connector on the faceplate bracket after
removing the faceplate. Touching the connector may cause
damage to the unit.
NOTE
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case whilst detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Reattaching the Faceplate:
1
Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.
2CAUTION
Do not set the right side of the faceplate in the faceplate bracket
first, when reattaching the faceplate. Doing so may cause the
connector on the faceplate bracket to malfunction.
2
Press the right side of the faceplate until it locks.

Clock display

Changing the Clock Display:
Press the CLK button to switch the clock display on and off.
NOTE
The clock indicator lights whilst the clock is displayed.
— 12 —