Mode; Move; Mover - AMSTRAD CPC464 User Manual

MODE

M O D E < i n t e g e r e x p r e s s i o n >
M O D E 1
COMMAND: To change the screen mode (0,1 or 2), and clear the screen to INK 0 , which may not be
the current PAPER INK . All text and graphics WINDOWS are reset to the whole screen, and the
text and graphics cursors homed to their respective origins.
Associatedkeywords: WINDOW, ORIGIN

MOVE

M O V E < x c o o r d > , < y c o o r d >
M O V E 3 4 , 3 4
COMMAND: To move the graphics cursor to a position specified by the absolute co-ordinates. YPOS
and XPOS are the corresponding functions to establish the current graphics cursor position.
Associated keywords: MOVER, PLOT, PLOTR, DRAW, DRAWR, ORIGIN,
TEST,TESTR,XPOS,YPOS

MOVER

M O V E R < x o f f s e t > , < y o f f s e t >
M O V E R 3 4 , 3 4
COMMAND: To move the graphics cursor to a position relative to the current co-ordinates. YPOS
and XPOS are the corresponding functions to establish the current graphics cursor position.
Associated keywords: MOVE , PLOT, PLOTR, DRAW, DRAWR, TEST,
TESTR,XPOS,YPOS
NEW
N E W
N E W
COMMAND: Delete current program and variables. KEY definitions are not lost, and the display is
not cleared.