Appendix B Faq And Troubleshooting; Reset To Factory Default - Sitecom DC-202 Full Manual

Xdsl/cable broadband router

Hide thumbs Also See for DC-202:

Table of Contents

Appendix B FAQ and Troubleshooting

There are 2 methods to reset to default.

Restore with RESET button

First, turn off the router and press the RESET button in. And then, power on the router and

push the RESET button down until the M1 and or M2 LED (or Status LED) start flashing, then

remove the finger. If LED flashes about 8 times, the RESTORE process is completed. However,

if LED flashes 2 times, repeat.

Restore directly when the router power on

First, push the RESET button about 5 seconds (M1 will start flashing about 5 times), the

release the button.

Table of Contents

Do you have a question about the DC-202 and is the answer not in the manual?