Sitecom DC-202 Full Manual page 44

"Control table" is the table at the bottom of the "MAC Address Control" page. Each row of this
table indicates the MAC address and the expected IP address mapping of a client. There are
four columns in this table:
In this page, we provide the following Combobox and button to help you to input the MAC
address.
You can select a specific client in the "DHCP clients" Combobox, and then click on the "Copy
to" button to copy the MAC address of the client you select to the ID selected in the "ID"
Combobox.
Previous page and Next Page To make this setup page simple and clear, we have divided
MAC Address MAC address indicates a specific
client.
IP Address Expected IP address of the
corresponding client. Keep it empty if
you don't care its IP address.
C When "Connection control" is
checked, check "C" will allow the
corresponding client to connect to
this device.
the "Control table" into several pages. You can use these
buttons to navigate to different pages.
44