Table of Contents
Advertisement
4.6.4 MAC Address Control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
MAC Address Control Check "Enable" to enable the "MAC Address Control". All of the
Connection control
Control table
settings in this page will take effect only when "Enable" is
checked.
Check "Connection control" to enable the controlling of which
wired and
clients can connect to this device. If a client is
denied to connect to this device, it means the client can't access
to the Internet either. Choose "allow" or "deny" to allow or deny
the clients, whose MAC addresses are not in the "Control table"
(please see below), to connect to this device.
43
Advertisement
Table of Contents
Need help?
Do you have a question about the DC-202 and is the answer not in the manual?
Questions and answers