Table of Contents
Advertisement
Note:
• To view scrambled channels through the
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
Connecting a camcorder
Use this connection to view a picture directly
from your camcorder.
1
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
camcorder to AUDIO and S VIDEO IN
inside the drop-down panel on the front
of the projection TV (White-AUDIO Left,
Red-AUDIO Right**).
2
Press VIDEO 2 to select the video inputs
from a camcorder.
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
Installing and Connecting the Projection TV (continued)
Connecting two VCRs for tape
editing
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
2
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
8
Disconnect all power sources before making any connections.
S VIDEO
S VIDEO
VIDEO 2 INPUT
(Front of projection TV)
Disconnect all power sources before making any connections.
VIDEO 1
S VIDEO
VIDEO
VCR (for playback)
L
(MONO)
AUDIO
AUDIO R AUDIO L VIDEO
OUT
LINE
R
IN
OUT
VIDEO
AUDIO-L
AUDIO-R
1
VMC-810S/820S
(not supplied)
(Rear of projectionTV)
VIDEO IN
VCR
– 10 –
YC-15V/30V (not supplied)
Audio/
video
VMC-810S/820S
outputs
(not supplied)
VIDEO
AUDIO-L
AUDIO-R
VIDEO
L
AUDIO
R
(MONO)
Camcorder
(Rear of projection TV)
AUX
TO
CONVERTER
IN
VIDEO 3
VHF/UHF
OUT
MONITOR AUDIO
(VAR/FIX)
Y
VIDEO
VCR (for recording)
L
P
B
(MONO)
AUDIO
AUDIO R AUDIO L VIDEO
P
R
R
COMPONENT
VIDEO
AUDIO-L
AUDIO-R
VMC-810S/820S
(not supplied)
MONITOR
OUT
Indicates direction
of signal
LINE
IN
OUT
S VIDEO
OUT
7
OUT
LINE
IN
IN
2
Advertisement
Table of Contents
