Jump - Sony KP-43T70K Service Manual

Watching Two Programs at One Time — PIP
The Picture-in-Picture (PIP) feature allows
you to view two channels simultaneously,
one in the full size "main" picture and one in
a smaller "window" picture.
You can move the window picture to any
location on the screen.
The symbol "b" or "B" The symbol "≥"
indicates which picture's indicates which
TV channel or input picture's sound is being
source can be changed. received.
TV channel or input-
source mode for the
6
Main
main picture* (yellow-
picture
green-colored)
10
TV channel or input-
source mode for the
window picture*
(white-colored)
Window
picture
* It will dim in about 3 seconds.
z
Tip
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset location).
Using Your New Projection TV (continued)
Using the Yellow Labeled Buttons for PIP Operations
CH

JUMP

0 - 9
or or
and ENTER
(white labeled button)
ANT
Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol "b" (or "B") is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
AUDIO
symbol " " will appear for a few seconds to indicate which picture's sound is being
received.
This is useful when you need to copy down information of the main picture.
FREEZE Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
window picture size is automatically changed to 1/9 if it was 1/16.
Press again to resume normal PIP viewing.
SWAP Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
1 8
Using the Yellow Labeled Buttons for PIP Operations
PIP
POSITION
or
ACTIVE
TV/VIDEO
(white labeled
button)
Press to select the TV channel on which the symbol "b" is
displayed. (for details, see "Watching the TV" on page 14)
Speed Surf
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
– 15 –
Press to display a window picture.
Each time you press this button, the picture size will change
(1/9 n1/16 nno display).
To close the window picture, press PIP repeatedly until it disappears.
Press POSITION repeatedly to change the location of the window picture
(counterclockwise) around the main picture.
You can also change the location by pressing the V, v, B or b button.
The window picture moves in the direction of the arrow indicated on the
pressed button.
Press to select either the main or window picture in order to change the
TV channel or video source using the white labeled buttons below. The
symbol "b" (or "B") will appear to indicate which picture's channel or input
mode can be changed.
Press repeatedly to scroll through the available video inputs for the
picture on which the symbol "b" (or "B") is displayed. (see "TV/VIDEO" on
page 15)
Note:
• If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see "Channel Skip/
Add" on page 25)
1 7
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART