Tape Dubbing Operation - Kenwood KXF-W1030 Instruction Manual

Tape dubbing operation

The dubbing refers to the copy of the recorded contents of a
16
tape to another tape (tape in Deck A = tape in Deck B).
1
Insert tapes in the cassette decks.
Tape to be played
A
POWER
1 ¡
@ 7 #
Deck A
2
Start dubbing.
Press the DUBBING key.
(dB) — —5 0 +3 +6 (dB)
To stop dubbing
Press the (7) STOP key of deck B.
(dB) — —5 0 +3 +6 (dB)
Tape to be recorded onto
A
—
(dB) —5 0 +3 +6 (dB)
1 ¡ 8 ¶
PAUSE REC/ARM
@ 7 #
Deck B
DUBBING
DUBBING
Lights up
7
The figure shows an example for the CT-403 or KXF-W3030
PUSH/OPEN
0
POWER
1 ¡
A
TAPE
AUTO REVERSE
@ 7 #
: Keys or controls to be used in this operation
÷ Dubbing will start.
1. The recording level cannot be adjusted for dubbing.
2. The DOLBY NR switch does not function during dubbing.
Notes Notes Notes
The tape recorded by dubbing features the same NR
system as the original tape in Deck A.
÷ Both decks A and B enter the stop mode.
PUSH/OPEN
0
—
(dB) —5 0 +3 +6 (dB)
1 ¡ 8 ¶
PAUSE REC/ARM
B
TAPE
AUTO REVERSE
@ 7 #