Fi-6140/Fi-6240/Fi-6130/Fi-6230/Fi-614Pr - PFU Limited fi-6230 Maintenance Manual

<Installation>
Follow the removing procedure in reverse.
Wire the Lamp cable as shown below.
Note: Make sure that the claws at both sides of the Inverter are securely latched.
Note: Perform the following adjustments after replacing the parts.
- Referring to Section 6-1-3 "Maintenance Mode #2," adjust the magnification.
- Referring to Section 6-1-4 "Maintenance Mode #3," adjust the offset.
- Referring to Section 6-1-5 "Maintenance Mode #4," adjust the white level.
08 July 27, 09 K.Okada
07 Nov.12, 08 K.Okada
06 Mar.10, 08 K.Okada
Rev. DATE DESIGN
Design July 27, 2007 K.Okada
A.Miyoshi I.Fujioka Refer to Revision Record on page 2.
T.Anzai I.Fujioka Refer to Revision Record on page 2.
T.Anzai I.Fujioka Refer to Revision Record on page 2.
CHECK APPR. DESCRIPTION
CHECK K.Okada

fi-6140/fi-6240/fi-6130/fi-6230/fi-614PR

TITLE
DRAW
No.
PFU LIMITED
APPR. T.Anzai
Section 5-12-6
Maintenance Manual
P1PA03540-B0XX/6
146
Page
CUST.
257
/