Vqt3J15 - Panasonic HDC-SD80P Owner's Manual

p If [ECONOMY] (F 44) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and then open it again.
p Turn the unit off using the power button.
[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (F 126)
[POWER LCD]
This makes it easier to view the LCD monitor in bright places including outdoors.
p These settings will not affect the images actually recorded.
+2 (Makes even brighter)/
*(Automatic adjustment)
A
* It is not displayed in the Manual Mode or in the Playback Mode.
p When the AC adaptor is in use, the LCD monitor is set to
p When the LCD monitor is bright, the recordable time with the battery will be shorter.
[LCD SET]
It adjusts brightness and color density on the LCD monitor.
p These settings will not affect the images actually recorded.
1 Touch [
LCD SET
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch / to adjust settings.
4 Touch [ENTER].
p Touch [EXIT] to exit the menu screen.
[AV MULTI]
Please refer to page 95.
[COMPONENT OUT]
Please refer to page 95.
[HDMI RESOLUTION]
Please refer to page 95.
[OFF]/
(Volume high)
/
+2 +1
+1 (Makes brighter)/
].
[COMPONENT]/[AV OUT]
[480i]/[1080i]
[AUTO]/[1080i]/[480p]
/
/ / /
0 -1 A
0 (Normal)/
-1
+1 automatically.
(Makes less bright)/

VQT3J15

45