Internal Disk Storage Options - IBM System x3500 M3 Product Manual

Table 5. Memory options (Part 2)
Part Feature Description
number code
UDIMMs
44T1568 1915 1 GB (1x 1 GB, 1Rx8, 1.5 V) PC3-10600
CL9 ECC DDR3 1333 MHz LP UDIMM
44T1569 1914 2 GB (1x 2 GB, 2Rx8, 1.5 V) PC3-10600
ECC DDR3 1333 Mhz LP UDIMM
49Y1403 A0QS 2 GB (1x 2 GB, 1Rx8, 1.35 V) PC3L-10600
CL9 ECC DDR3 1333 MHz LP UDIMM
49Y1404 8648 4 GB (1x 4 GB, 2Rx8, 1.35 V) PC3L-10600
CL9 ECC DDR3 1333 MHz LP UDIMM

Internal disk storage options

IBM System x3500 M3 server supports the following internal storage configurations:
Four 3.5" simple-swap or four 3.5" hot-swap SATA hard drive bays (only available in CTO)

Eight 3.5" hot-swap SAS/SATA hard drive bays (only available in CTO)

Eight 2.5" SFF hot-swap SAS/SATA SFF hard drive bays

16x 2.5" SFF hot-swap SAS/SATA SFF hard drive bays

24x 2.5" SFF hot-swap SAS/SATA SFF hard drive bays

Figure 5 shows these configurations.
Figure 5. Internal drive configurations
IBM System x3500 M3
Maximum Models
supported where used
(Max per CPU)
12 (6) -
12 (6) -
12 (6) -
12 (6) -
14