Audio Control; Displaying The Audio Control 1 Screen; Displaying The Audio Control 2 Screen - Kenwood KVT-627DVD Instruction Manual

Audio Control

You can adjust the front and rear and right and left audio balance.
Displaying the Audio Control 1
screen
Audio Control 1 screen
1
4
5
3
2
7
- 1
1
Displaying the Audio Control 2
screen
Audio Control 2 screen
Me n u
BMS AMP Bass
9
BMS AMP FREQ
11
Audio Control 2
6
5
6
7
8
9
+ 6 d B
10 10
Low
Normal
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
5 Adjusts the right and left volume balance.
1
6 Adjusts the front and rear volume balance.
7 Adjusts the volume of the present source based on
the difference level of original volume.
• If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if you
suddenly switch to another source may be extremely loud.
1
8 Displays the Audio Control 2 screen.
9 Adjusts the bass boost of the B.M.S power amplifier
(optional accessory).
• You may not set some models of power amp boost to "+18".
See the catalog or instruction manual of power amplifier.
p Sets the center frequency of bass boost you have
set for "AMP Bass". (optional accessory)
If you set the center frequency to "Low", it will be
dropped approximately 20% to 30%.
q Displays the Audio Control 1 screen.
79
|
English