Usb Parameters - Datalogic Hand-held devices II Configuration Manual

USB PARAMETERS

1.
Read the Enter Configuration code ONCE, available at the top of each page.
2.
Read configuration codes from the desired groups.
= Read the code and follow the procedure given
= Default value
3.
Read the Exit and Save Configuration code ONCE, available at the top of
each page.
USB-COM
Handshaking, Ack/Nack protocol, FIFO,
Inter-character delay, Rx timeout, Serial
trigger lock
USB-KBD
Keyboard nationality, FIFO, Inter-character
delay, Inter-code delay, Control character
emulation
USB-IBM
No parameter selection required.
13