Insert Transitions - MAGIX Fastcut Manual Manual

Tip: If you want to cut the video material to match the beat of the background
music, tap your foot along to the beat and stop playback on the desired spot.
Start/stop keyboard shortcut: Spacebar
3. Cut/remove object:
If you want to remove the part of the object played back up to this point,
-
press the "Remove object start" button":
Keyboard shortcut: Z
If you want to keep the part of the object played back up to this point, press
-
the "Split object" button:
Keyboard shortcut: T
Repeat these steps until you reach the end of the movie.
4.
You have now cut the entire movie to the beat and removed all unwanted material
at the same time.

Insert Transitions

Transitions control how your movie plays from one object to another. Normally, a so-
called "hard cut" is made between objects: The first image of the following object
appears directly at the end of the previous object, i.e. without any special fade effect.
However, you are free to select and add a transition:
Click on the transition icon between two objects.
1.
The transition dialog will open.
2. Select an option and click "Preview" to get an idea of the effect.
-
If "Transition" is selected, the objects will be faded softly from one into the
-
other.
"Fade Through Black" fades the last image of the first object to black, and the
-
first image of the following object begins shortly after.
"More..." opens the transition menu next to the preview monitor, providing
-
you with a large selection of transition types.
Click "OK" if you are satisfied with the settings you have selected.
3.
If "No Fade" is selected, a hard cut will be made.
Manual editing mode 31