Exchange Video Clips; Move The Time Section Of The Video Clip In The Object - MAGIX Fastcut Manual Manual

Exchange video clips

All the video clips that have already been loaded into the movie in MAGIX Fastcut
can be easily exchanged:
1. Press the following button in the desired video object:
The video clip selection dialog will open.
Note: If you want to use a video clip which has not yet been loaded, you must first
add it to the movie (view page 26).
Select the video clip you want to replace the old clip with.
2.
Click on "Exchange".
3.
MAGIX Fastcut will replace the old video clip in the object with the one you
selected.
You can now move the time section of the video clip in the object (view page
4.
27).

Move the time section of the video clip in the object

As long as MAGIX Fastcut is in template mode, you cannot move the object start and
end on the timeline. This is how MAGIX Fastcut ensures that transitions remain in the
same position so that they are always synchronized with the music.
However, you can move the time section of the video clip that is located "behind the
video object" and displayed during playback:
1. Select the video object you want to edit.
The playback marker is located behind the start transition of the selected video
object.
A bar will be displayed at the bottom edge of the preview monitor which
represents the time section of the assigned video clip which is to be played.
Select the bar and move it to the desired position.
2.
Press the following button to position the bar exactly where you want:
-
The time section of the video clip in the object has been moved. The image in the
preview monitor will be updated accordingly.
Note: The playback marker will remain at the same position in the movie strip
since the contents of the video object have been moved, not the object itself.
Template mode 27