Select Template - MAGIX Fastcut Manual Manual

20
If the video clips do not contain an LVR stream, MAGIX Fastcut will generate this
file when the option is activated. This can be very time-consuming, but it im
editing speed in MAGIX Fastcut considerably
Click on the "Continue" (5) button.
6.
The selection page for movie templates (view page 20) will appear.

Select template

On this page you can select the movie template you want to use for your video clips.
To do this, proceed as follows:
Select one of the templates (1).
1.
MAGIX Fastcut will immediately play back a preview of the selected template in
the preview monitor (4).
Once you have found the right te
2.
clip(s)" (2) button.
Note: n = The number of video clips selected on the previous page
MAGIX Fastcut generates a new movie out of the previously selected video clips
using the template selected here.
e transport controls in the preview monitor( 4) to play back the generated
3. Use th
movie.
4. If you are satisfied with the result
MAGIX Fastcut then makes the generated film available for further editing (view
page 25 ).
5. If you want to make changes, you have the following options:
Press the "Apply template to n clip (s) again"(2) button.
-
MAG IX Fastcut then "shuffles" the video clips again.
.
mplate, press the "Apply template to n
s, press the "Use template" (5) button.
proves
www.magix.com