Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWERP button on the remote control.
You can also use the POWERP button on the TV.
Select Language of the OSD.
2. Press the ENTERE button. Press the
the ENTERE button. The message
3. Press the
button to select
button. The message
Select the Antenna source to memorize.
We recommend setting the TV to
mode is only intended for use in retail environments.
If the unit is accidentally set to
button on the TV. When the volume OSD is displayed, press and hold the
4. Press the
button to memorize the channels of the selected connection. Press the ENTERE button to select Start.
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
In Cable mode, you can select the correct signal source among
button, then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5. Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTERE button with
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTERE button when channel memorization is complete. The message
6. Press the ENTERE button. Press the
daylight saving time.
is displayed. If you select
7. Press the
button to select
8. Press the
button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, refer to the 'Setting the Time' instructions to set the clock.
(see page 28)
9. The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTERE button.
10. The message Enjoy your TV. is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
1. Press the
button to display the menu. Press the
then press the ENTERE button.
2. Press the ENTERE button again to select
Plug & Play
feature is only available in the TV mode.
button to select the language, then press
Select 'Home Use' when installing this TV in
Use, then press the ENTERE
mode for the best picture in your home
mode and you want to return to
button to select Auto, then Press the ENTERE button. The message
Manual, Set current date and time.
or Auto, then press the ENTERE button.
button to select Setup,
English - 7
(Standard): Press the volume
button on the TV for 5 seconds.
by pressing the
Set the Clock Mode.