Advertisement
To navigate through the menu single click the button to move down an option. Long press to select an
option
RSSI Calibration: To calibrate your RSSI reading, select the high reading with your radio and receiver
powered on and nearby. Flip off the radio and select the low reading to calibrate the bottom signal range.
*The reading you will see on the OSD is the true received strength of the signal (more accurate and
different from a 2 way telemetry signal being sent from a receiver)
Display RSSI: 0 = off, 1 = on
Text Align: Shifts the RROSD horizontally if you need to adjust it for any reason
Set Alarms: Allows you to set both a voltage and mAh consumption alarm. This will cause the respective
indicator to blink on screen when the desired value is reached
Exit: Exits the Menu
Advertisement
