Table of Contents
Advertisement
Setting Up Motion Detection Recording
To record data only when motion is detected:
1.
On the hover menu, click MENU, and then click SETUP.
2.
Click RECORD, and then click MOTION/EVENT SETUP.
3.
Set MOTION to ON.
4.
Set the motion SENSITIVITY level. [1~10].
5.
To set a global motion area (each channel can also be configured individually), click
AREA.
6.
Use the mouse to select or clear squares on the grid:
a)
b)
c)
7.
Repeat as necessary for each camera channel.
8.
When motion area setup is complete select SAVE to save settings and exit setup.
Right click the screen, and then click CLEAR ALL.
Click the squares to include in the motion grid.
Right-click again, and then click SAVE AND EXIT to save the selected motion grid.
43
Advertisement
Table of Contents
