Rear Sealing Cover - Subaru LEGACY 2003 Service Manual

REAR SEALING COVER

EXTERIOR BODY PANELS
7. Rear Sealing Cover
A: REMOVAL
1) Remove rear door trim. <Ref. to EI-31, REMOV-
AL, Rear Door Trim.>
2) Remove rear speaker. <Ref. to ET-8, REMOV-
AL, Rear Speaker.>
NOTE:
• Carefully remove butyl tape. Excessive force will
easily break the cover.
• If cover gets broken, replace it with a new one.
EB-00058
B: INSTALLATION
1) Install in the reverse order of removal.
2) When replacing sealing cover, use butyl tape.
3) Press sealer-applied area firmly to prevent any
floating on surface.
Butyl tape:
3M8626 or equivalent
NOTE:
• Apply a uniform bead of butyl tape.
• Attach sealing cover, keeping it from becoming
wrinkled.
• Breaks in the bead will allow water leakage and
contamination.
C: INSPECTION
If sealing cover gets damaged, replace it with a
new one.
EB-16