Mobile Preset; Clock Display; Adjusting Time; Disabled System Indicator (Dsi) - Kenwood KRC-309S Instruction Manual

Kenwood cassette receiver instruction manual krc-409, krc-309s
Hide thumbs Also See for KRC-309S:
Table of Contents

Advertisement

General features

Mobile Preset

This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
1
Press the SRC button repeatedly to select the standby mode.
"OFF" is displayed when the standby mode is selected.
2
Press the Q button to enter the mobile preset plan mode.
Press either the 4 or ¢ button to select the type of
3
speaker. The setting switches as follows.
Off ("SP-F") / For the OEM speaker ("SP-O") / For 6/6x9 in.
speaker ("SP-6") / For 5/4 in. speaker ("SP-5")
4
Press the Q button to end the mobile preset plan mode.
NOTE
When you change the setting of type of speaker, the bass,
middle, and treble tone settings are returned to original levels.

Clock display

Changing the Clock Display:
Press the CLK button to switch the clock display on and off.
NOTE
The clock indicator lights while the clock is displayed.

Adjusting Time

Adjust the time.
1
When the clock is not displayed, first press the CLK button to
display the clock.
2
Press the ADJ button for at least two seconds to enter the
clock adjustment mode. The clock display will blink.
3
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
4
Press the CLK button to end the clock adjustment mode.

Disabled System Indicator (DSI)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for
this function is ON.
Turning Disabled System Indicator On/Off:
1
Turn the power of the unit off.
2
While pressing buttons #1 and #3 at the same time, press the
SRC button.
Repeat steps 1 and 2 above to turn DSI back on.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Release button
Removing the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
— 8 —
Projections
Grooves

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krc-409

Table of Contents