Start Auto Tuning - Panasonic Viera TH-P42GT30A Operating Instructions Manual

[Auto Tuning]
- Set all Digital TV channels automatically
1

Start Auto Tuning

Digital TV Auto Tuning
All digital TV tuning data will be erased
•
All the previous tuning settings are erased.
•
When the operation is completed, the channel at channel position [1] will be displayed.
•
Search begins in the order from the lower channels to the higher channels.
•
If tuning has not been done completely
[Manual Tuning]
- Set Digital TV channel manually
Normally use [Auto Tuning] or [Update Channel List] to update Digital TV channels on your channel
list. If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning
Physical Channel
[CH22]
Signal Quality 0
Signal Strength 0
No. Channel Name
Digital TV: 0
[Update Channel List]
You can add new channels, delete duplicated channels, update channel name and position
automatically to Channel List.
Digital TV Update Channel List
Scan
CH 6
This will take about 3 minutes.
RF Ch Channel Name
Digital TV: 0
Searching
[New Channel Message]
Selects whether to give a notification message when a new Digital TV channel is found. [Off] / [On]
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
[Signal Condition]
Selects a channel and checks the Digital TV signal condition.
•
To change the channel
Digital TV Signal Condition
Channel Name 101 DZFinfokanal
Signal Quality
Signal Strength
0 2
Network Name Wenvoe
RF Parameter [CH32] 562.00 MHz
2
[Manual Tuning] (see below)
MHz
474.00
10
10
Type New
•
All channels found will be added to the Digital TV Channel List.
- Update channels automatically
•
Channel List is updated while keeping your settings in
69 [Favourites Edit], [Channel List], [Child Lock], etc.
•
Depending on the signal condition, the update may not work
Type Quality
properly.
- Display a notification message
•
Selecting OK will perform [Update Channel List].
•
Sometimes, mainly during summer months at night, the
TV may pickup distant TV stations outside your broadcast
due to favourable short term ionosphere conditions. In such
circumstances when you press OK button, the TV does not add
any new channels. This is normal.
- Check Digital TV signal
CH
These bars show the maximum signal value of the
4 6 8 10 selected channel.
A good Signal Strength is not an indication of suitable signal for
Digital TV reception. Please use the Signal Quality indicator as
follows:
[Signal Quality]:
•
Green bar
•
Yellow bar
•
Red bar
Settings are made automatically
Digital TV Auto Tuning
Scan
CH 6
This will take about 3 minutes.
RF Ch Channel Name
32 TV Finland
32 TV Finland
32 SVT HD
Digital TV: 4
Searching
select physical channel
select offset
start tuning
Good
Poor
Bad (Check the aerial)
Automatically retune
69
all Digital TV channels
received in the area.
Type Quality
Digital TV 1
Digital TV 1
Digital TV 1
43