Notes; Analogue Tv - Panasonic Viera TH-P42GT30A Operating Instructions Manual

Table of Contents

Advertisement

Important Installation Notices
Install the TV on a stable surface
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to
falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of the supporting furniture.
Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable support.
Not standing the television on cloth or other materials placed between the television and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television or its controls.
When cleaning the TV, remove the mains plug
Cleaning an energised TV may cause electrical shock.
When the TV is not going to be used for a long period of time, remove the mains plug
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
Transport only in upright position
Transporting the TV with its display panel facing upward or downward may cause damage to the internal circuitry.
Allow sufficient space around the TV for radiated heat
Minimum distance
10
10
10
(cm)
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical shock.
Do not apply strong force or impact to the display panel
This may cause damage resulting in injury.
Do not expose your ears to excessive volume from the
headphones
Irreversible damage can be caused.
The TV is heavy. Handle the TV by 2 or more people. Support as
shown to avoid injury by the TV tipping or falling.

Notes

Do not display a still picture
for a long time
This causes the image to remain on the plasma
screen ("image retention"). This is not considered
a malfunction and is not covered by the warranty.
Typical still images
Programme number and other logos
Image displayed in 4:3 mode
Video game
Computer image
To prevent image retention, contrast is lowered
automatically after a few minutes if no signals are
sent or no operations are performed. (p. 94)
When using the pedestal, keep the space between the bottom of the TV
and the surface where the TV is set.
7
If using a Wall-hanging bracket, refer to its manual.
Auto power standby function
The TV will automatically go into Standby mode
in the following conditions:
• no signal is received and no operation is
performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 20)
• no operation is performed for the period
selected in [Auto Standby] (p. 37)
This function does not affect the recording of
Timer Programming and One Touch Recording.
Keep the TV away from these types of
equipment
Electronic equipment
In particular, do not place video equipment near
the TV. Electromagnetic interference may distort
images / sound.
Equipment with an infrared sensor
This TV also emits infrared rays. This may affect
operation of other equipment.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents