Sending Images Individually - Canon PowerShot G16 User Manual

Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
instead of the camera (= 144).

Sending Images Individually

1
Choose an image.
z z Turn the <7> dial to choose an image
to send.
2
Send the image.
z z Press the <q><r> buttons to choose
[Send this image], and then press the
<m> button.
z z When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
z z
Image transfer will begin. The screen
darkens during image transfer.
z z After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
z z After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
• For movies that you do not compress
compressed file is sent instead of the original file. Note that this
may delay transmission, and the file cannot be sent unless there is
enough space for it on the memory card.
•
Keep your fingers or other objects off the Wi-Fi antenna area (=
Covering this may decrease the speed of your image transfers.
• Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
• When sending movies to smartphones, note that the supported image quality
varies depending on the smartphone. For details, refer to the smartphone user
manual.
• To disconnect from the camera, press the <n> button, choose [OK] on
the confirmation screen (either press the <q><r> buttons or turn the <7>
dial), and then press the <m> button. You can also use the smartphone to
end the connection.
• On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
• Sending images to Web services will take less time when resending images
you have already sent that are still on the CANON iMAGE GATEWAY server.
Choosing the Image Resolution (Size)
On the image transfer screen, choose [
buttons, and then press the <m> button. On the next screen, choose the
resolution by pressing the <o><p> buttons, and then press the <m>
button.
• To send images at original size, select [No] as the resizing option.
• Choosing [ ] or [ ] will resize images that are larger than the selected
size before sending.
• Movies cannot be resized.
(= 123), a separate,
4).
] by pressing the <o><p>
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, M, C1,
and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
142