Sending Images; Sending Images Individually - Canon PowerShot S200 User Manual

z z
When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to "Sending
Images"
•
To add multiple cameras, repeat the above procedures starting from step 1.
•
Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.
(= 123).

Sending Images

Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
instead of the camera (= 126).

Sending Images Individually

1
Choose an image.
z z
Turn the <7> dial to choose an image
to send.
2
Send the image.
z z
Press the <q><r> buttons to choose
[Send this image], and then press the
<m> button.
z z
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
z z
Image transfer will begin. The screen
darkens during image transfer.
z z
After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
z z
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
123