Table of Contents
Advertisement
Basic Operations
Playing an audio CD or MP3 files
1
4
Connect the supplied mains lead (see page 23).
1
Press CD.
(On the remote, press OPERATE
(POWER, see page 2) and then press
FUNCTION repeatedly until "CD"
appears in the display.)
2
Press Z PUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
3
Close the lid of the CD compartment.
4
Playing an audio CD or MP3 files (continued)
Playing a CD with MP3 files
Note
1
Press CD.
Before playing a file, this
player reads all file and
2
folder information on the
Press Z PUSH OPEN/CLOSE to open the CD
CD. Depending on the file
compartment and place the CD on the CD
structure, it may take more
compartment (see page 4) .
than a minute to read them.
During this time,
3
Close the lid of the CD compartment.
"READING" is displayed.
4
Press u.
Tip
You can use the buttons
The player plays all MP3 files on the CD.
mentioned in the table on
When you play a CD with MP3 files, MP3 indicator
page 5 for additional
lights up.
operations in the same way
as when playing an audio
CD.
Track number
To select a folder
Press FLDR + to go forward and FLDR – to go backward .
Press FOLDER +, – on the remote.
To select a file
Press > to go forward and . to go backward.
6
SECTION 2
GENERAL
2, 3
With the label side up
Z PUSH
OPEN/CLOSE
., >
FLDR +, –
MP3 indicator
u
CD
After the file name is
displayed, the playing time
will appear
4
Press u (N on the remote).
The player plays all the tracks once.
To play a CD with MP3 files, see
page 6.
Use these buttons for additional operations
Tip
To
Playback starts from the
adjust the volume
track you last stopped
playing (Resume play).
During stop, the track
stop playback
number to be played are
pause playback
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
go to the next track
press x in stop mode.
go back to the previous track .
remove the CD
turn on/off the player
* The button has a tactile dot.
**Once you open the CD compartment, the track to start play will
change to the beginning of the first track.
Example of folder structure and playing
Notes
order
• A folder that does not
include an MP3 file is
The playing order of the folders and files is as follows:
skipped.
• Maximum number of
CD-R
CD-RW
folders: 255
Maximum number of files:
255
• Folder names and file
1
names can be displayed
with up to 64 characters.
• The characters A - Z, a - z,
0 - 9, and _ can be
displayed on this player.
Other characters are
displayed as "*".
• This player conforms to
Version 1.1 of the ID3 tag
format. If the file has the
ID3 tag information, "song
title", "artist name" and
"album name" can be
displayed.
6
About CD-Rs/CD-RWs and MP3 files
This player can play CD-Rs/CD-RWs recorded in the CD-
DA format* and MP3 files recorded in the CD-ROM
format, but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is
a recording standard used for Audio CDs.
CFD-S35CP
This section is extracted
from instruction manual.
Display
Track
Playing
number
time
u
Z PUSH
OPEN/CLOSE
VOLUME +, –
., >
x
OPERATE
(POWER)
Press
VOLUME +*, –
(VOL +*, – on the remote.)
x
u* (X on the remote)
Press the button again to
resume play after pause.
>
Z PUSH OPEN/CLOSE**
OPERATE
(or POWER, see page 2)
continued
5
Folder
MP3 file
1
2
2
3
3
4
5
4
6
7
8
5
9
0
7
5
Hide quick links:
Advertisement
Table of Contents
