Setting Delta Control; Setting Squelch - Cobra UK 29 LTD ST Operating Instructions Manual

29 UK-English.qx 6/22/99 12:14 PM
Operation
Setting Delta

Setting Delta Control

Control
Delta Tone Control is used to set the desirable
level of received audio.
Sw i tch
1
Ro t ate the Tone Co nt rol to desired leve l .
2

Setting Squelch

Setting Squelch
Squelch is the "control gate" for incoming signals.
Gate closed
Full
1
allowing only very strong signals to enter.
18
Page 18
to Delta+ or Delta - to co nt rol tuning.
clockwise rotation closes the "gate"
2 Full anticlockwise rotation opens the "gate"
allowing all signals in.
To achieve the Desired Squelch Setting (DSS),
3
turn the Squelch control anticlockwise until
you hear noise. Now turn the control clockwise
until the noise just stops. This is the DSS
setting.
Operation
Gate open
Gate set to Desired
Squelch Setting (DSS)
19