Rack Installation; Rackmount Options - Shure ULX Wireless System User Manual

Antenna Combiners and Accessories
The supplied antennas can be connected directly to the BNC-type ANTENNA connectors. However, optional antenna mounting accessories from Shure
can improve reception and reduce rack clutter. Use the following guidelines:
• Antennas and receivers must be from the same band.
• Mount antennas more than 40 cm (16 inches) apart.
• Use Shure UA825 or UA850 low-loss coaxial antenna cable (or any 50 ohm, low-loss cable such as RG-8U).
Visit www.shure.com for more information on wireless antenna accessories.
UA802
UA802 UA806
UA806
UA825
UA825
UA850
UA850
UA100
UA100
Coaxial Cables
COAXIAL CABLES
UA440
UA440
Antenna Rack Mount Kit
ANTENNA RACK MOUNT KIT

Rack Installation

ULXP4
6 mm (1/4")
ULXP4 DUAL
UA600 UA600
Front Mount Antenna Kit
FRONT MOUNT ANTENNA KIT
UA870
Active Directional Antenna
for more focused reception
UA870
UA820
1/2-Wave Antenna
included with ULXP4
systems
UA844
Distribution Amplifier
UA844
combines antennas and power supplies for
multiple receivers
DISTRIBUTION AMPLIFIER

Rackmount Options

The following shows rackmounting options for one to four receivers and
lists the required accessories.
UA830
UA830
UA870
Inline Antenna Amplifier
for long antenna cable runs
FOR LONG ANTENNA CABLE RUNS
1 x UA506
1 x UA600
2 x UA820
1 x UA440
1 x UA507
4 x UA820
1 x UA844
1 x UA507
4 x UA506
1 x UA844
2 x UA507
3