APPENDIX E: ELEMENT
A. ACCESSING THE ELEMENT
1. Slide the control panel upwards to expose control panel docking connector
2. Remove connector and slide out the control panel completely
3. Unfasten decorative panel screw
4. Unfasten protective cover
B. REMOVING DEFECTIVE ELEMENT
1. Cut the thermostat wire (ensure there is enough wire for reconnection)
2. Unfasten ground connector
3. Unfasten L1
4. Unfasten L2
C. INSTALLING NEW ELEMENT
1. Link the new thermostat wire with the previous cut wire
2. Fasten ground connector
3. Fasten L1
4. Fasten L2
30