Network Connections - D-Link DSM-750 User Manual

Section  - Configuration
Select one of two ways to connect your DSM-750 to your network:
•
Connect the supplied Ethernet cable to the network cable connector, and attach the other end to a router
or hub on your network.
•
Attach the supplied three antennas by threading them onto the "gold" antenna connectors located on the
back of the DSM-750. Be sure the antennas are secure and in an upright position.
Note: If you place the DSM-750 in an enclosed area (e.g. an entertainment center) you may need to obtain
an extension antenna to provide an optimal wireless signal.
D-Link DSM-750 User Manual

Network Connections

RJ-45 Ethernet Connector
Wireless Antennas
1