Activating Wireless Transmission Between Specific Units; Additional Information; Troubleshooting - Sony SWF-BR100 Operating Instructions Manual

Activating wireless
transmission
between specific
units
You can specify the wireless connection
used to link the Wireless Transceiver to
the subwoofer using the Secure Link
function.
This function is useful when you use
multiple wireless products.
1
Press the SECURE button
on the Wireless Transceiver
(the LED indicator lights
and flashes amber).
 LED
 SECURE button
2
Press SECURE button on
the rear of the subwoofer
(the LED indicator lights
and flashes amber).
3
Both LEDs light in solid
turns into amber, and the
subwoofer will create bass
sound. To cancel this
operation, press the
button again.
Proceed the step 2 within 2
minutes.
Cancelling the Secure
Link function
Press and hold SECURE button on the
Wireless Transceiver for several seconds
until the LED indicator turns off.
~
If the LED indicator on the Subwoofer is
still blinking amber, press and hold SECURE
button on the rear of the subwoofer for
several seconds until the "
green or flashes in green.
Additional
Information

Troubleshooting

If you experience any of the following
difficulties while using the system, use
this troubleshooting guide to help
remedy the problem before requesting
1
support. Should any problem persist,
2
consult your nearest Sony dealer. When
bringing the system in for repairs, be
sure to bring in the entire system. This
product is a system product, and the
entire system is needed to determine
the part requiring repair.
No TV sound is output from the
subwoofer.
ˎ Check the connection of the audio
cable that is connected to the wireless
transceiver and the TV.
ˎ Check the sound output of the TV. When
sound does not come out, confirm the
sound output settings of the TV and the
volume of the TV speaker.
/
1 indicator turns
GB
GB
5