Cleaning The Appliance - Mazzer Mini User Manual

inglese 23-07-2001 13:16 Page 12

14) CLEANING THE APPLIANCE

DISCONNECT THE APPLIANCE'S POWER SUPPLY BY UNPLUGGING IT
BEFORE CLEANING.
THE APPLIANCE MUST NOT BE CLEANED USING WATER JETS.
Do not install the appliance in rooms where water jets are used for cleaning.
THE APPLIANCE MUST BE CLEANED PERIODICALLY BY SKILLED TECHNI-
CAL PERSONNEL ONLY.
Use perfectly clean, disinfected cloths or brushes for cleaning.
Do not use abrasive products as these are liable to take the sheen off shiny parts.
Hopper
Wash the hopper once it has been removed from the appliance (unscrewing the
relevant fastening screw), using neutral soap and water, rinse abundantly with
lukewarm water and dry thoroughly.
It is advisable to clean the hopper periodically.
Once the hopper has been cleaned,it must be attached to the upper grinding blade
holder using the relevant screw.
Grinding system
Remove the safety screw which prevents the adjustment disk from being removed.
Unscrew the adjustment disk by turning it clockwise. Having removed the upper
grinding blade holder, clean the grinding blades, threads and the entire grinding
system thoroughly using a clean brush and cloth.
Having refitted the upper grinding blade holder in the relevant slot,screw the adju-
stment disk back on,put the self-locking screw back in whichever of the two holes
on the disk enables the best adjustment and, having refitted the hopper and secu-
red, adjust the grinding as required.
Doser (Coffee grinder-version)
Having discharged the ground coffee, clean the doser's star unit with a clean brush,
expelling the material removed by pulling the doser lever.
Use a dry cloth to thoroughly clean the outlet of the ground coffee on the bot-
tom of the doser.
Spout (Coffee grinder with bag holder)
Wipe clean the spout from which ground coffee is released using a dry cloth.
Last revised: SJ00 11/2000
12