Technical Requirements For Using Tc65 Terminal - Siemens TC65 Terminal Hardware Interface Description

TC65 Terminal Hardware Interface Description
Confidential / Released
2.1

Technical Requirements for Using TC65 Terminal

•
Computer running Windows 2000, Windows XP
•
1.8V or 3.0V SIM card
•
8 to 30 Volts power supply unit
•
RS-232 cable (for high data rates ≤ 1.5m)
•
UART capable of data rates up to 460800 bps. Usually this requires an appropriate serial
adapter to be installed on the computer.
•
RF antenna
•
Audio handset
•
Customized mating connector for the IO interface connector type Micro Mate-N-LOK.
•
Terminal program to control the COM port, for example Windows HyperTerminal.
•
Access to a GSM/GPRS network providing support of the authentication protocol PAP,
CHAP or MS-CHAP. The GPRS settings of your service provider should be at hand.
Please contact your service provider or follow the link below to obtain all required
information.
http://www.gsmworld.com/technology/gprs/operators.shtml
TC65 Terminal_HD_V02.000b Page 20 of 65
s
2007-02-19