Table of Contents
Advertisement
Most access points or routers will have a dedicated WPS light on the
front of the unit which will begin blinking once WPS has been activated.
You now have 2 minutes in which to activate WPS on the AC240 USB
adapter.
With the AC240 plugged into your computer and installed, push the WPS
button on the side of the adapter for 2 seconds.
The LED on the top of the AC240 will begin blinking rapidly to indicate
it has entered WPS mode.
It may take up to 2 minutes for the WPS configuration process to finish.
When complete, Windows will indicate you are now connected to a
wireless network.
Windows XP
Windows 7
16
Advertisement
Table of Contents
