Station/Disc Naming (Snps/Dnps); Opening Message Edit - Kenwood DPX503 Instruction Manual

Display Settings

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
2
Select Name set mode item during Menu
mode
Select the "Name Set" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Enter Name set mode
Press the Control knob for at least 1 second.
4
Enter the name
Operation type
Move the cursor to the enter
character position
Select the character type*
Select the characters
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
⁄
• Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character
"D"
Button
[3] [
Times pressed 1
5
Exit Menu mode
Press the [FNC] button.
⁄
• A title cannot be attached to Audio file media.
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Memory numbers
- FM/AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• Change the title of station/CD by the same operation
used to name it.
12
|
DPX503/DPX303
Operation
Push the Control knob towards right
or left.
Press the Control knob.
Turn the Control knob or push it
towards up or down.
"A" "N" "C"
¢ ¢ ¢ ¢
] [2] [ ] [6] [ ] [2] [ ] [3]
1 2 3

Opening message edit

Setting the opening message to be displayed when
the power is turned on.
1
Select Opening message edit item during
Menu mode
Select "OPENING MSGE Edit".
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Opening message edit mode
Press the Control knob for at least 1 second.
3
Enter the character
Operation type
Move the cursor to the enter
character position
Select the character type*
Select the characters
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type
4
Press the Control knob for at least 2 seconds.
"Completed" is displayed.
5
Exit Menu mode
Press the [FNC] button.
⁄
• The Opening message can be displayed up to 8
"E"
characters.
2
Operation
Push the Control knob towards right
or left.
Press the Control knob.
Turn the Control knob or push it
towards up or down.
Alphabet upper case
Alphabet lower case
Numbers and symbols