Firmware Installation; Repairs - BulletHD Pro 1080P User Manual

Firmware Installation

This is not necessary to install the firmware to view videos or pictures. The
firmware is only necessary to install for choosing different settings at 5 / 15
minutes per video file selection; which is available for Windows OS system.
1. Download the latest firmware at www.BulletHD.us - Support – Firmware for
PRO1080p into your MicroSD card.
2. Screw the rear cap ③ , install your MicroSD card to BulletHD PRO1080p
3. Switch ⑩ to firmware mode. F = Firmware
4. Press and hold the POWER/Shutter button for 3 seconds to power on.
5. Red LED will blink for 20 seconds, indicating the Bullet HD is running the
firmware and will power off.
6. Now you need to take out the MicroSD card and format it.
*Once the MicroSD card is formatted the time and date settings will be lost!*
Or follow the instruction at tutorial video show at our YouTube
Channel/BulletHDCam!
REMARKS:
THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
Removing/Installation battery
The battery is designed to have a very tight fix to maximize reliability in high
reliability in high vibration activities. To remove the battery, pull it out with the
battery holder.
It is intentionally not easy to do, but the battery will come out.
Additional batteries and mount packages are available at www.BulletHD.us

Repairs