Page 1
Original Operating Instruction Petrol Grass Trimmer HS-PT 2538 WARNING! PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING THIS UNIT KEEP THIS MANUAL FOR FUTURE REFERENCE 2538 Homebase Art. No.340737 HS-PT...
Petrol Grass Trimmer HS-PT 2538 WARNING! PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING THIS UNIT KEEP THIS MANUAL FOR FUTURE REFERENCE 2538 EH-Art.-No.:34.018.52 I.-Nr.:11010 HS-PT Safety information: • If petrol has overflowed, do not under any circumstances attempt to start the engine. Instead, remove the machine from the affected area.
Additional safety instructions 5. Keep all screws and fasteners tight. Never operate your equipment when it is improperly adjusted or not completely and securely assembled. 1. DO NOT USE ANY OTHER FUEL than that recommended in your manual. Always follow instructions 6.
Table of contents 1. Safety Regulations 2. Layout and items supplied 3. Intended use 4. Technical data 5. Before starting the equipment 6. Operation 7. Cleaning, maintenance, storage, transport and ordering of spare parts 8. Disposal and recycling 9. Troubleshooting Helpline No.
Important! 18. Connecting piece for long handle 19. Combined oil/petrol cylinder Please read and follow the operating information 20. Spark plug wrench before using for the first time. When using the 21. Key/spanner for changing the spool equipment, a few safety precautions must be observed 22.
5. Before starting the equipment 5.3 Fuel and oil Recommended fuels Use only a mixture of normal unleaded petrol and 2-stroke 5.1 Assembly engine oil. Mix the fuel mixture as indicated on the fuel mixing table. 5.1.1 Assembly of the long handle (Fig. D - E) Please note: Do not use a fuel mixture which has been Remove the transport guard cap from the lower long kept for longer than 90 days.
Page 13
Please note: Always pull the starter cable out in a straight TRIMMING / MOWING line. If it is pulled out at an angle, then friction will occur on Swing the trimmer from side to side in a scything motion. the eyelet. As a result of this friction, the cable will become Always keep the cutting head parallel to the ground.
7. Cleaning, maintenance, storage, transport Please note: Never clean the air filter with petrol or inflammable solvents. Clean the air filter with compressed and ordering of spare parts air or by tapping it. 7.1 Cleaning 7.2.3 Maintenance of the spark plug (Fig. K1-K2) •...
7.5 Ordering replacement parts Please quote the following data when ordering replacement parts: • Type of machine (HS-PT 2538) • Article number of the machine (34.018.52) • Identification number of the machine (11010) • Replacement part number of the part required For our latest prices and information please go to www.einhell-uk.co.uk, or contact our HELPLINE on...
Page 16
Please adhere to the following maintenance periods in order to ensure a failure-free operation. Important! Fill in engine oil and fuel before starting up the engine for the first time. After an After an After an After an Before operating operating operating operating...
Page 17
Technical specification subject to change. Helpline No. UK 0151 649 1500 / IRE 189 094 6244...
Page 19
PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of This product is guaranteed for twenty four months from the date of original purchase. Any defects that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
Need help?
Do you have a question about the HS-PT 2538 and is the answer not in the manual?
Questions and answers