Useful Information
Answering System
Problem
The answering system
is on, but incoming
messages are not
recorded.
The MESSAGE
indicator flashes rapidly,
" Message full" is
displayed, and no new
messages are recorded.
You cannot operate the
answering system from
a touch tone phone.
You cannot operate the
answering system.
Call Display information
is not displayed during
message playback
(p. 48).
60
• The recording time is set to "Greeting only". Select
"1 minute", "2 minutes" or "3 minutes" (p. 21).
• Memory is full. Erase some, or all, of the messages
(p. 49).
• Memory is full. Erase some, or all, of the messages
(p. 49).
• Make sure you enter the correct remote code.
• The answering system may not respond if the tones are
too short to activate the unit. Press each button firmly.
• The answering system is off. Turn it on (p. 55).
Someone is operating the answering system
•
The unit is recording a message
•
lift the handset or press
• The caller information will not be displayed if the
Caller List is renewed and the caller information is
erased (p. 25).
Cause and Remedy
.
SP-PHONE/HEADSET
{
.
To answer the call,
}.