Timer Recording - Toshiba D-R3 Owner's Manual

00566A-D-R3_84~88 8/31/04 10:32 AM Page 86
86
- English
Downloaded From Disc-Player.com Toshiba Manuals
Video
The disc revolves, but no image or bad quality
images are displayed.
Check whether there is damage to or
Checkpoint 1
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 2
properly.
If scenes change from dark to bright
Checkpoint 3
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Sound
No sound.
Are you watching a program in slow or
Checkpoint 1
skip mode?
If you are playing a program at a speed
other than normal speed, sound will not
be heard.
Check the connections and settings.
Checkpoint 2
Check whether the disc is damaged.
Checkpoint 3
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected the
Checkpoint 1
correct digital output options in the
Audio Output Options menu.
(See page 31.)

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc for recording.
Check whether the current disc is
Checkpoint 2
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Checkpoint 2 Recording will be cancelled, if the
power is disconnected due to a power
failure or another similar reason while
recording.