WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Figure 2
Figure 4
5. Depress the spring releases located in the left and right hand slides, see figures 4 and 5.
6. Slide drawer out and set on work surface, see figure 6.
7. Repeat the process to remove the lower drawer.
Note: The lower drawer does not have a wiring harness that must be disconnected.
COMPONENT ACCESS
COMPONENT ACCESS
DRAWER REMOVAL
To remove the top drawer:
1. Open the drawer.
2. Locate the wiring harness on the left side
of the drawer, see figure 1.
3. Pull the harness out of the front cover to
expose the connector.
4. Free the harness from the plastic retainer
and disconnect the harness, see figures
2 and 3.
Figure 5
4-1
Figure 1
Figure 3
Figure 6