Antenna Installation - Kenwood KCA-XM100V Instruction Manual

Antenna Installation

Install the RF antenna (Accessory 1) on the trunk lid or roof.
The RF antenna can be installed with magnetic force of the magnet embedded in the antenna.
Install the RF antenna while parking at the place where the reception is good.
An Example of Installing on the Roof
When Installing on the Trunk Lid
When you install the RF antenna (Accessory 1)
on the trunk lid, for the purpose of waterproof and
prevention of the cable disconnection, install it using
the waterproof pad for the RF antenna (Accessory 4).
1.
Glue the waterproof pad for the RF antenna
(Accessory 4) beside the waterproof rubber of
the trunk room.
2.
Draw in the cable of the RF antenna (Accessory
1) from the trunk lid to the trunk room.
Wipe smears off the surface on which the waterproof pad for
the RF antenna (Accessory 4) is installed.
4
|
KCA-XM100V
RF antenna (Accessory 1)
RF antenna (Accessory 1)
Waterproof pad for the RF
antenna (Accessory 4)
Waterproof rubber