REMOTE START OWNER’S GUIDE INTRODUCTION Congratulations on your purchase of a Hyundai Remote Start System with Deluxe Vehicle Security featuring PowerCode Technology . This easy-to-use manual details the operating instructions and benefits of the Remote Start System with Deluxe Vehicle Security. Should you have questions or concerns regarding this system that this manual does not address, please contact your local Hyundai dealer.
Hatch / Tailgate Glass, if Equipped Caution: Do not remote start vehicle in an enclosed environment (i.e. closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of Carbon Monoxide. Carbon Monoxide is harmful to your health.
Page 4
STEERING WHEEL / STALK / PANEL FEATURES AND BENEFITS OF THE REMOTE START SYSTEM WITH DELUXE VEHICLE SECURITY Remote-Start - Start your vehicle with the press of a button. Preheat or precool the vehicle’s interior. • • Remote Keyless Entry - Lock and Unlock the vehicle’s doors and tailgate.
STEERING WHEEL / STALK / PANEL REMOTE CONTROL OPERATION Your Remote Control Transmitter The remote control keyless entry transmitter controls the arming and disarming functions of the security system, as well as remote start, car finder and panic. The system is armed when the doors are locked with the remote control transmitter. The system is disarmed when the doors are unlocked with the remote control transmitter.
Remote Start Safety Features For safety and security reasons, the system will shut down the engine during remote start operation if any of the following occur: • The brake pedal is pressed before the vehicle ignition key is turned on •...
Caution: Do not leave children or animals unattended in the vehicle when using the quick-stop feature. Note: If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated.
Service mode is used when servicing the vehicle to prevent the system from unexpectedly starting the engine while being serviced. While in service mode, the system’s keyless entry functions will operate normally, but the security system will not arm and the remote start function is temporarily disabled. The system will honk the horn 2 times if an attempt is made to activate the remote start system.
/ programming button (located on the driver’s side, secured to 3 Chirps Hood or Brake the remote start wire harness) before turning on the ignition key. The horn will honk a 4 Chirps Trunk/Tailgate number of times to indicate which entry point in the chart to the right, triggered the alarm.
Insert your key into the ignition and turn it to the ON position. Press the override/programming button secured to the remote start wire harness above the driver’s kick panel. The vehicle alarm will stop sounding and the vehicle will be able to be started with the key.