HP procurve 420 Getting Started Manual page 38

Getting Started With Access Point Configuration
9.
10. If you are using the HP ProCurve Wireless Access Point 420 na (J8130A)
3-4
Type exit to leave configuration mode, then type the show interface wire-
less g command to display the access point's default wireless configura-
tion, including wireless communication domain, radio channel, and
operation status. The following illustration shows the default settings.
HP ProCurve Access Point 420(if-ethernet)#exit
HP ProCurve Access Point 420#show interface wireless g
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
SSID
Radio mode
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security-----------------------------------
Closed System
WPA mode
Multicast cipher
Unicast cipher
WPA clients
Authentication Type
Encryption
Default Transmit Key
WEP Key Data Type
Static Keys :
Key 2: EMPTY Key 3: EMPTY
===========================================================
HP ProCurve Access Point 420#
model sold in the United States, radio channels 1 - 11 are the only options
supported under FCC regulations, and cannot be changed. However, if
you are using HP ProCurve Wireless Access Point 420 ww (J8131A) model
sold in other countries, then you need to set the country code to indicate
the channels permitted for you area. The wireless radio is automatically
enabled once a country code is set.
First type country ? to display the list of countries. Select the code for your
country, and enter the country command again, followed by your country
code (e.g., GB for Great Britain).
HP ProCurve Access Point 420#country gb
HP ProCurve Access Point 420#
: Enterprise 802.11g Access Point
: Enterprise Wireless AP
: 802.11b + 802.11g
: 0 (AUTO)
: Disabled
: FULL (5 dBm)
: 54Mbps
: 2346 bytes
: 2347 bytes
: 100 TUs
: 2 beacons
: 128 stations
: DISABLED
: Dynamic key
: WEP
: TKIP
: SUPPORTED
: OPEN
: DISABLED
: 1
: Hexadecimal
Key 4: EMPTY