Hp Dial-A-Lan Bundles - HP J2415A Installation And Reference Manual

HP Dial-A-LAN Bundles

These optional products serve remote PCs, Macintoshes, and UNIX
workstations by allowing users to dial in to AdvanceStack hubs.
The two models are:
a two-port version: HP J3157A AdvanceStack Dial-A-LAN 2A Bundle
a four-port version: HP J3158A AdvanceStack Dial-A-LAN 4A Bundle
HP J23157A Dial-A-LAN 2A Bundle
The HP Dial-A-LAN 2A Bundle has two RJ-11 connectors and two built-in
V.34 modems. The V.34 modems support V.34, V.FC, V.32bis, V.32, V.22,
V.22bis, V.22A/B, V.23, V.21, Bell 212A, and Bell 103. They also support
compression and error correction as specified V.42, V.42bis, MNP 2-5, and
LAP-M.
HP J3158A Dial-A-LAN 4A
If you need more than two ports, the HP Dial-A-LAN 4A has four RS-232
ports for connecting up to four external modems. This module can also be
used in an ISDN environment with terminal adapters.
Both the 2-Port and 4-Port modules support these features:
Access speeds available to 115.2 Kbps. Throughput speeds available are
dependent on line quality, type of data transmitted, and the remote
node's ability to function at this sustained rate.
Configurable through HP Stack Manager and from the Dial-A-LAN
Manager. Dial-A-LAN Manager can be run under OpenView
DOS/Windows and Windows.
PC and workstation dial-in access with PPP (default) and SLIP. IP, IPX,
NetBEUI, and LLC dial-in are also supported.
PPP compression available for dial-in and LAN-to-LAN connections.
DHCP support for dial-in client address assignment.
Hub Reference
4-13