Installation In A Vehicle - Kenwood SIRIUS KPA-H2C Installation Manual

Installation in a vehicle

Note: Do not put Here Anywhere in the docking station until you have completed the installation.
2
1. Determine where you want to mount 2. The leaves on the base can be bent to con-
Here Anywhere. form to curved mounting surfaces.
2
• Do not install Here Anywhere
2
where it may obstruct your view
through the windshield or your view
of your vehicle's indicator displays.
• Do not install Here Anywhere
2
where it will hinder your access to
the vehicle's controls.
• Do not install Here Anywhere
2
where it may hinder the function of
safety devices such as an airbag.
3. Peel the covering away from the adhesive on
Doing so may prevent the air-bag
the bottom of the base and adhere it to the
from functioning properly in the
mounting surface. Use the provided screws
event of an accident.
to securely attach the base to the surface.
• Find a location that provides good
• If using screws, be sure that you do not
visibility of and access to
damage wiring or other systems on the
Here Anywhere's front panel.
other side of the mounting surface.
2
• Kenwood strongly recommends
that you mount Here Anywhere in a
2
location where the base can be
attached with the provided screws.
4
Installation in a vehicle (continued)
5. Plug the cigarette lighter adapter
4. Using the provided screw,
into the back of the cradle, as
assemble the docking station
shown. Don't plug the adapter into
cradle to the base.
the cigarette lighter until the instal-
lation is completed.
KPA-H2C Installation Guide KPA-H2C Installation Guide
6A. Plug the cassette adapter 6B. If your car stereo has an aux input,
into the back of the cradle, plug the supplied audio cable into
as shown. the back of the cradle instead of the
cassette adapter. Plug the audio
cable's white (L ch,) and red (R ch.)
connectors into your car stereo.
5