Song Playback And Practice Of Each Part - Yamaha P-115 Owner's Manual

Recording Your Performance
2
While holding down [REC], press the
desired Part button to engage Record
Ready mode.
If you want to change the value of the parameters
shared by two parts, select either part.
NOTICE
• In this status, do not press [PLAY] again or any key.
Otherwise, recording starts and the data will be
deleted.
3
Press [REC] again to change the initial
settings and to exit from Record Ready
mode.

Song Playback and Practice of Each Part

All the Songs except for the Demo (page 17) let you turn on or off the [L] and [R] parts individually. By turning
off [R], for example, you can practice the [R] part while the [L] part is playing back, and vice versa.
1
Start playback of the desired Song.
To start the User Song, press [PLAY].
To start the Preset Song, press one of the C2 – C#6
keys to start playback while holding down
[DEMO/SONG].
For details on what Song number is assigned to
each key, see "Quick Operation Guide" (page 28).
1st 10th 20th
Song Song Song
C2 C3
22
P-115 Owner's Manual
30th 40th 50th
Song Song Song
C4 C5 C6
2
While holding down [PLAY], press [L] or
[R] to turn the Part on/off.
3
Practice the part which is turned off.
4
Press [PLAY] to stop playback.
NOTE
• Selecting another Song will cancel the on/off status of the parts.