Troubleshooting - GreenWorks GBL80300 Owner's Manual

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Motor fails to start Battery is not secure.
when switch trigger
is depressed.
Battery is not charged.
Unit will not start. Defective power switch.
The unit will start, Blocked tube.
but air will not flow
through the tube.
SOLUTION
Ensure that the battery is fully secured in
the blower. Refer to Installing the Battery
section in this manual.
Charge the battery pack according to the
instructions included with your model.
Have the power switch replaced by an
authorized service center.
Clear the blockage.
16