Operation - GreenWorks GBL80300 Owner's Manual

OPERATION

STARTING/STOPPING THE BLOWER (Fig.5)
Ensure that the battery is installed in the blower
beeps signaling the blower is active.
Squeeze the trigger to start the blower.
Release the trigger to stop.
ADJUSTING THE AIR VELOCITY (Fig.6)
Press the Speed Selection Button to increase the air velocity to the desired setting.
Note:
The current speed setting will remain even if the unit is turned off.
Trigger
OPERATING THE BLOWER
To keep from scattering debris, blow around the outer edges of a debris pile. Never blow
directly into the center of a pile.
To reduce sound levels, limit the number of pieces of equipment used at any one time.
Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
surfaces when water is available.
Conserve water by using power blowers instead of hoses for many lawn and garden
applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely
away.
After using blowers or other equipment, clean up. Dispose of debris properly.
Button
Fig. 5
13
Speed Selection
Button
Fig. 6